National Fenestration Ratings Council

From Zissil
Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
{{Infobox
 
{{Infobox
|title = NFRC
+
|title National Fenestration Rating Council (NFRC)
 
|image        = [[File:Space holder.jpg|215px|alt=National Fenestration Ratings Council]]
 
|image        = [[File:Space holder.jpg|215px|alt=National Fenestration Ratings Council]]
|header5 =  Other Names:
+
|header5 =  Other Names
 
|data6 =  NFRC
 
|data6 =  NFRC
 
|header7 = Description:
 
|header7 = Description:
Line 18: Line 18:
 
The United States Department of Energy estimates that homeowners can recoup the cost of an enhanced energy efficient window product within four to seven years through reduced energy bills.   
 
The United States Department of Energy estimates that homeowners can recoup the cost of an enhanced energy efficient window product within four to seven years through reduced energy bills.   
  
== Rating Elements ==
+
== Elements ==
 
The NFRC rates a window's U-Factor, it's solar heat gain coefficient, its visible transmittance, the window's air leakage and its condensation resistance.  
 
The NFRC rates a window's U-Factor, it's solar heat gain coefficient, its visible transmittance, the window's air leakage and its condensation resistance.  
  
Line 24: Line 24:
 
The U-Factor is a standard industry measurement that rates how well a window product prevents heat from escaping. The rate of heat loss is expressed in terms of the U-factor (U-value) of the window's assembly. These ratings generally fall between 0.20 and 1.20, with a lower U-value offering greater resistance to heat flow and better insulating value.
 
The U-Factor is a standard industry measurement that rates how well a window product prevents heat from escaping. The rate of heat loss is expressed in terms of the U-factor (U-value) of the window's assembly. These ratings generally fall between 0.20 and 1.20, with a lower U-value offering greater resistance to heat flow and better insulating value.
  
=== Solar Heat Gain Coefficient ===
+
==== Solar Heat Gain Coefficient ====
 
The solar heat gain coefficient (SHGC) measures a product's ability to block heat caused by sunlight. The SHGC is the fraction of solar radiation which is both directly transmitted and absorbed  through a window and  which is subsequently released inward. SHGC is indicated as a number between 0 and 1. Lower SHGC ratings transmit less solar heat into the house. Homeowners in different climates will look for differing SHGCs, based on the needs of their particular climate.
 
The solar heat gain coefficient (SHGC) measures a product's ability to block heat caused by sunlight. The SHGC is the fraction of solar radiation which is both directly transmitted and absorbed  through a window and  which is subsequently released inward. SHGC is indicated as a number between 0 and 1. Lower SHGC ratings transmit less solar heat into the house. Homeowners in different climates will look for differing SHGCs, based on the needs of their particular climate.
  
Line 30: Line 30:
 
Visible Transmittance (VT) assesses the amount of visible light that is transmitted through a window.  VT is expressed as a number between 0 and 1 with high numbers indicated a higher light transmission.
 
Visible Transmittance (VT) assesses the amount of visible light that is transmitted through a window.  VT is expressed as a number between 0 and 1 with high numbers indicated a higher light transmission.
  
=== Air Leakage ===
+
==== Air Leakage ====
 
Air Leakage (AL) is expressed by indicating the amount of air which passes through the window opening.  Heat gain and loss occur when air infiltrates through cracks in the window assembly. Lower AL ratings alert buyers that there is less air passing through cracks in the window assembly.
 
Air Leakage (AL) is expressed by indicating the amount of air which passes through the window opening.  Heat gain and loss occur when air infiltrates through cracks in the window assembly. Lower AL ratings alert buyers that there is less air passing through cracks in the window assembly.
  
Line 37: Line 37:
  
 
== Limits ==
 
== Limits ==
The National Fenestration Rating Council does not provide recommendations about [[Replacement-Windows|replacement windows]], nor does it set performance standards. The responsibility of the NFRC is limited to testing and rating replacement windows and assigning them a rating based on that testing.
+
The National Fenestration Rating Council does not provide recommendations about replacement windows, nor does it set performance standards. The responsibility of the NFRC is limited to testing and rating replacement windows and assigning them a rating based on that testing.
 
+
 
+
{{Energy Efficient Windows‎}}
+
  
 
[[Category:Replacement Windows]]
 
[[Category:Replacement Windows]]

By adding content or making edits to this page you are agreeing to give full, complete and permanent rights of this content to Zissil.com. You are also verifying that this is unique content that has not been copied from any other source and is not copyright protected.

Cancel | Editing help (opens in new window)
 
PrivacyDisclaimer Terms of Use
Share |
Share |
 
Personal tools
Namespaces
Variants
Actions
ZissilSidebarMenu
Navigation
Toolbox